NOTE: Ensure that the green tab is back in its original home position, which is represented by a triangular-arrow. The corona wire can be cleaned by sliding the green tab left-to-right a few times. When the toner cartridge is installed properly, it will click into place, and the green-lock lever will raise automatically.Īs a general rule of thumb, it is good practice to clean the corona wire every instance that the drum/toner unit is replaced.
#BROTHER MFC 7860 TONER CARTRIDGE INSTALL#
Install the new toner cartridge onto the drum. When discarding or recycling the toner cartridge, ensure that the cartridge is sealed tight in a bag. NOTE: When the protective cover is removed, immediately assemble the drum/toner assembly to avoid degradation to print life and quality. Shake the cartridge from side-to-side to distribute toner evenly within the cartridge.
Hold the cartridge level with both hands. NOTE: Do not employ the use of cleaning agents that contain alcohol, ammonia, spray, or flammable substance for either outside or inside the device. On the drum/toner assembly, there is a green-lock lever push the lever down and remove the toner from the drum unit. Remove the drum/toner assembly that is visible through the open front-cover. (If the device is used, it takes up to 10 minutes for the internal parts to cool down) Leave the device on for 10 minutes with the front-cover open. The device must be turned on prior to replacing the toner cartridge. Only unpack the new toner when it is going to be immediately installed. When the Toner cartridge is empty, the LCD will show "Toner Ended" and it is time to replace the toner.Ī general rule of thumb is to clean the device every time the toner cartridge or drum is replaced. When the LCD shows "Replace Toner", users can push the printer to finish off any remaining toner by pushing Menu, 1, 8, and Continue. When the Toner cartridge is low, the LCD will show "Toner Low."
0 kommentar(er)
